Encaustic Handmade Cement Tiles

  • Square

    50 70 100
    <>140 Shape-Size-1104 170
    200 250. 300


    Shape-Size-1104 200x230


    Shape-Size-1104 200x230

    Other shapes & Sizes can be customized...

  • Square tiles

    Shape-Size-1104 200x230 200x230 200x230 200x230
    200x230 200x230 200x230 200x230 200x230
    200x230 200x230 200x230 200x230 And hundreds of other patterns more...

    Border & Corner

    200x230 200x230 200x230 200x230 200x230
    200x230 200x230 200x230 200x230 And dozens of other border & corner more...


    200x230 200x230 200x230 200x230 200x230
    200x230 200x230 200x230 200x230  And dozens of other Hexagon more...


    200x230 200x230 200x230 200x230 And dozens of other skirtings more...


    200x230 200x230 200x230 200x230 And dozens of patchworks more...
  • Square tiles

    Shape-Size-1104 Shape-Size-1104 Shape-Size-1104 Shape-Size-1104 Shape-Size-1104
    Shape-Size-1104 Shape-Size-1104 Shape-Size-1104 Shape-Size-1104 Shape-Size-1104
    Shape-Size-1104 Shape-Size-1104 Shape-Size-1104 Shape-Size-1104 Shape-Size-1104
    Shape-Size-1104 Shape-Size-1104 Shape-Size-1104 Shape-Size-1104 And hundreds of other patterns more...

    Border & Corner

    Shape-Size-1104 Shape-Size-1104 Shape-Size-1104 And dozens of other border & corner more...

  • After years in this production, EUREKA has developed nearly 200 different solid colors for clients' choice. In case of need, we accept to test new colors based on Benjamin or Pantone books or other materials on clients' request.

    Shape-Size-1104EP01 Shape-Size-1104EP02 Shape-Size-1104EP03 Shape-Size-1104EP05 Shape-Size-1104EP06 Shape-Size-1104EP07
    Shape-Size-1104EP08 Shape-Size-1104EP09 Shape-Size-1104EP10 Shape-Size-1104EP11 Shape-Size-1104EP12 Shape-Size-1104EP13
    Shape-Size-1104EP14 Shape-Size-1104EP15 Shape-Size-1104EP16 Shape-Size-1104EP17 Shape-Size-1104EP18 Shape-Size-1104EP19
    Shape-Size-1104EP20 Shape-Size-1104EP21 Shape-Size-1104EP22 Shape-Size-1104EP23 Shape-Size-1104EP24 Shape-Size-1104EP25
    Shape-Size-1104EP26 Shape-Size-1104EP27 Shape-Size-1104EP28 Shape-Size-1104EP30 Shape-Size-1104EP32 Shape-Size-1104EP33
    Shape-Size-1104EP35 Shape-Size-1104EP36 Shape-Size-1104EP37 Shape-Size-1104EP38 Shape-Size-1104EP39 Shape-Size-1104EP40
    Shape-Size-1104EP41 Shape-Size-1104EP42 Shape-Size-1104EP43 Shape-Size-1104EP44 Shape-Size-1104EP45 And nearly 100 colors more...
  • Step 1: Testing colors and preparing divider molds and pressing molds based on orders. [wonderplugin_slider id="7"]
    Step 2: Insert divider mold into pressing mold. Then pouring the prepared colors into the pattern divider chambers as designs . Shape-Size-1104
    Step 3: The pattern divider to be removed and then the first coat will be covered with another two layers of dried mortars and humidified one as basement. [wonderplugin_slider id="6"]
    Step 4: Put whole mold into hydraulic pressing machine for a while. Shape-Size-1104
    Step 5: The tiles to be removed from molds carefully by the craftsman. Shape-Size-1104
    Step 6: After curing in clean open air areas, tiles will be dipped into water tanks. Shape-Size-1104
    Step 7: The tiles will be cleaned and taken out to cooling rooms and put on drying racks for 3-4 days for being dried enough (less than 17% humidity) before waxing and packing in carton boxes for loading. A serious quality control on every piece will be conducted in this step. [wonderplugin_slider id="8"]
  • Tiles are put face to face. Between the tiles, there are white papers to protect tile surfaces. Then, carton boxes are put into wooden pallets. Pallets will be loaded into container. Each 20 ft container can be loaded with 22-24 pallets. Actual packing will be changeable depending on real requested sizes and loading capacity which is allowed by Buyer’s custom officers.

    Shape-Size-1104 Shape-Size-1104
  • The installation process is very simple and rapid to accomplish. However, great care should be taken so as not to damage tile surfaces and edges during installation process.

    a) The tiles should be laid on perfect flat surfaces. Leave a joint of 1-2mm between tiles in installation. After you prepare the concrete cover, the tiles retain almost 2cm height altogether.  
    b) The tiles can be installed by using either glue/adhesive or thin mortar layer bed. To have a good adherence of floors:

    •  Submerge tiles in a water basin before the installation

    •  It is necessary to trowel glue or mortar on both surface of leveled surface and at back of tiles by using a toothed paint scraper

    c) Laying tiles must be carefully handled to avoid of chipping out on edges. After laying the tiles, level tiles on floors by hands or rubber hammer and construction ruler.

    d) The exceeding adhesive cement on tile surfaces or edges has to be immediately cleaned on the surface with humid cloths. Otherwise such kind of stains will be very difficult to be removed later on.  

    e) Leave the floors untouched and protected until the mortar to be dried naturally enough before grouting.

    f) Fulfill the joints by grouting liquid. Color of this liquid should be white for the most suitable in any case. Other colors can be used on owner preference. Remove all excessive grouting materials before it is dried.  

    g) Wash the floors with soap and clean water and leave floors dried completely, then apply suitable penetrating sealer from qualified manufacturers to have the most expecting floor finishes. It is strongly suggested to test sealer with one single tile before apply the whole floor. 

    h) Depending on traffic frequency, repeat this sealing process every 6-12 months.
    •  Encaustic cement tile is handmade product and made from natural materials so the tiles are subject to contain color variations. It is  necessary to check tiles randomly before installation to have better distribution of tiles between laying areas to achieve the most uniform floors.   

    •  There will be some calcareous spots on tile surfaces as character of cement tiles to be naturally caused by reaction between chemical factors in cement and water. Those spots will be disappeared automatically from 1 to 2 months afterward of using

    •  Don't leave any space among the squares.  Adjust the squares to form the design well .

    •  A good leveling of your ground will facilitate its polishing.


Cement tiles are said to be appeared since 19th century in Spain and very soon, they were exhibited in France. Right after that, they became very popular in Europe, then America and were considered a high-end floor covering later on. They had been used in thousands  of landmark public buildings and palaces around the world. Cement tiles are made by hands, one at a time, using mineral pigments, cement, a mold and a hydraulic press machine; Colorful patterns of cement tiles can be customized; They are expected to have slight imperfections which give them character and depth…All of those aspects have made cement tiles special luxury building material. Nowadays, they are known throughtout worldwide as “Encaustic Handmade cement tile” and used in either interior or exterior areas.

Very soon right after being found, In 1858, French came to Vietnam, they also brought techniques and equipments to produce cement tiles to Vietnam. Being handmade products, labors play the most important factor of  this production while Vietnamese people are always acknowledged clever, skilled and hardworking. Therefore, Encaustic Handmade Cement Tiles could be known as the tradition of Vietnam. People can easily find in Vietnam many hundred-year houses or buildings or palaces, villas… with floors remaining luxury beauties such as Hochiminh Post office, Saigon Notre-Dame Cathedral..

EUREKA is now considered the Biggest producer of Encaustic Handmade Cement Tiles in Vietnam with total capacity of 18-22 containers per month. EUREKA has exported this beautiful product to over 45 different Countries in all 5 Continental.

Vietnam White marble


Encaustic Cement Tiles

Cultured stone

Multi-color Marble